Injection Systems
For every construction project, large or small, a strong and secure anchoring is crucial. Injection systems are indispensable. These systems ensure that anchors and other fasteners are securely anchored in concrete or other building materials.
At B+BTec, you'll find various injection systems that meet the highest standards, ensuring your construction projects are safe and reliable. Discover our range!
-
SBS-585 Standard Dispenser for 585 ml Side-by-Side Cartridges€65.70 -
SBS-585 Premium Dispenser for 585 ml Side-by-Side Cartridges€205.98 -
SBS-585 Pneumatic Dispenser for 585 ml Side-by-Side Cartridges€822.67 -
SBS-585 Electric Dispenser for 585 ml Side-by-Side Cartridges€1,558.51 -
C-420 Electric Dispenser for 420 ml Coaxial Cartridges€1,340.34 -
C-420 Pro Dispenser for 420 ml Coaxial Cartridges€267.18 -
Mixer BIS-HY€0.82 -
Mixer BIS-V, BIS-P€0.82 -
Mixer MIT-E€0.77 -
Extension 200 mm€0.39 -
Extension 1000 mm€1.65 -
 |
 |
 |
 |
||
| BIS-HY Hybrid GEN2 | BIS-PE Pure Epoxy GEN3 | BIS-V Vinylester | BIS-P Polyester | ||
| Load Values: | EXTREME | EXTREME | HIGH | MEDIUM | |
 |
ETA Concrete | ETA 19/0131, Optie 1 | ETA 19/0850, Optie 1 | ETA 14/0323, Optie 1 | ETA 15/0526, Optie 7 |
 |
ETA Post-Installed bonded stud ends | ETA 19/0130 | ETA 21/0959 ETA 23/0698 |
ETA 23/0765 | -- |
 |
ETA Solid/Hollow Brick | -- | -- | -- | ETA 15/0527 |
 |
Seismic Action C1 | M8 - M30/Ø8 - Ø32 | M8 - M30 /Ø8 - Ø32 | M12 -M30/Ø12 -Ø32 | -- |
 |
Seismic Action C2 | M12 -M24 | M12 -M24 | -- | -- |
 |
Design Service Life | 50 years/100 years | 50 years/100 years | 50 years | 50 years |
 |
Fire Test | F120 | F120 | F120 | -- |
 |
VOC | A+ | A+ | A+ | A+ |
 |
LEED Certificate | yes | yes | yes | -- |
 |
Potable Water Certificate | yes | yes | yes | -- |
 |
DesignFix® Support | yes | yes | yes | yes |
| FOR INSTALLATION: | |||||
 |
of Threaded Rods | • | • | • | • |
 |
of Stud Ends | • | • | • | -- |
 |
of Anchor Sleeves | • | • | -- | -- |
 |
in hammer/percussion drilled holes (HD) | • | • | • | • |
 |
in dust-extraction drilled holes (HDB) | • | • | -- | -- |
 |
in diamond drilled holes (DD) | -- | • | -- | -- |
 |
in dry/wet drilled holes | • | • | • | • |
 |
in water-filled drilled holes | • | • | • | -- |
 |
in uncracked concrete | • | • | • | • |
 |
in cracked concrete | • | • | • | -- |
 |
in solid/hollow brick | -- | -- | -- | • |
 |
in the ceiling | • | • | • | • |
 |
Curing time at +20°C (dry drilled holes) | 30 min. | 12 uur | 45 min. | 45 min. |
 |
Shelf Life | ||||
Using B+BTec Injection Systems
Our injection systems are designed to deliver optimal performance in various situations, even under demanding conditions.
This system works by mixing two chemical components in a special nozzle. This mixture is then injected into a drilled hole, after which an anchor rod or piece of rebar is screwed in by hand. This creates a very strong anchor that can withstand all kinds of influences.
Our chemical anchors are ideal for situations with cracked concrete or seismic loads. The technology ensures that no additional stress is placed on the surrounding material, keeping the anchor strong and secure.
Various Injection Systems for Diverse Applications
B+BTec offers various types of injection systems, each designed for specific applications and materials:
- Polyester: This system is suitable for medium loads and can be used in uncracked concrete and both hollow and solid stone. Polyester is an affordable solution for standard anchorings in construction.
- Vinylester: This system is suitable for heavier loads and can be used in both cracked and uncracked concrete. Vinylester provides strong adhesion and is extremely durable.
- Hybrid: For extremely heavy loads and fast curing, our hybrid system is the best choice. It can be used in cracked and uncracked concrete and combines the advantages of different resins for optimal performance.
- Pure-Epoxy: This system is ideal for the most demanding situations, where extreme strength and slow curing are required. Pure-Epoxy is ideal for use in cracked and uncracked concrete under very heavy loads.
A versatile and complete range for every project
In addition to the systems themselves, we also offer a wide range of accessories and tools to complete your project:
- Injection mortars: Available in variants such as polyester and hybrid with ETA for cracked concrete. These mortars provide strong bonds.
- Dispensers and cartridge holders: Electric, for precise and efficient use.
- Nozzles and extensions: For greater setting depths. Wire brushes, blow-out pumps, and screen housings: Essential for drill hole preparation and bonding.
- Accessories and roughing tools: For roughing diamond-bored holes for optimal bonding.
Your reliable partner for over 40 years
B+BTec has been active in drilling and anchoring technology for over 40 years. We manufacture and supply our products ourselves, ensuring we can always guarantee the highest quality.
Our products help you take your projects to the next level. Discover the benefits of our solutions for yourself and understand why B+BTec has been the preferred choice of construction professionals for years.