BIS-V Vinylester, 300 ml
BIS-V Vinylester, 300 ml
€28.90
BIS-V is a ETA option 1 assessed, rapid cure, styrene free, non-sag, Vinylester Injection Adhesive for HIGH LOADS. BIS-V is suitable for both Threaded Rod and Rebar in cracked and non-cracked concrete
Features
- ETA Assessed for Threaded Rods M8 - M30
and Rebar Dowels Ø8 - 32 mm - ETA Approved for Post Installed Rebar Ø8 - 25 mm
- Impact tested for the installation of Safety Barrier Glazing
and Glass Railings acc. to DIN 18008-4, Cat. A. new - For Cracked & Uncracked Concrete
- For Dry, Wet & Flooded Holes
- Fire Rated F120
- Seismic Approval C1
- VOC Rating A+
- Leed Tested
- Drinking Water Certificate
- Styrene Free
- B+BTEC DesignFix® Support
TECHNICAL DOCUMENTATION
Extensive Technical Documentation for BIS-V Vinylester can be found under downloads in an easily searchable knowledge base.
Installation Procedures
Installation Dimensions
For Installation Dimensions and Loads please refer to the Technical Data Sheets (TDS) or European Technical Assessment (ETA) under Downloads.
Curing Times
*Cartridge Temperature should be min. +15˚C. For damp bore holes the curing time should be doubled.
| Concrete temperature ˚C | Processing Time |
Dry bore holes |
| ≥ -10* | 90 min | 24 h |
| ≥ -5 | 90 min | 14 h |
| ≥ 0 | 45 min | 7 h |
| ≥ +5 | 25 min | 2 h |
| ≥ +10 | 15 min | 80 min |
| ≥ +20 | 6 min | 45 min |
| ≥ +30 | 4 min | 25 min |
| ≥ +35 | 2 min | 20 min |
| ≥ +40 | 1,5 min | 15 min |
Related Products
-
Mixer BIS-V, BIS-P€0.82 -
F-300 Economy€15.89 -
F-300 Premium€123.59