DRILLING + ANCHORING TECHNOLOGY WITH A BIG PLUS!
BIS-V Vinylester 300 ml
€ 30,20 excl. VAT
ETA option 1 approved, fast curing, styrene-free, Vinylester injection mortar for HEAVY LOADS. Suitable for threaded rods and rebar in Cracked and Uncracked Concrete.
- ETA Assessed for Threaded Rods M8 - M30 and Rebar Dowels Ø8 - 32 mm
- ETA Approved for Post Installed Rebar Ø8 - 25 mm
- Impact tested for the installation of Safety Barrier Glazing and Glass Railings acc. to DIN 18008-4, Cat. A. new
- For Cracked and Uncracked Concrete
- For Dry, Wet & Flooded Holes
- Fire Rated F120
- Seismic Approval C1
- VOC Report A+
- Lead Tested
- Drinking Water Certificate
- Styrene Free
- B+BTEC DesignFix® Support
In stock
Need a larger quantity or working on a bigger project? request a quote.
Installation Procedures
Installation Dimensions
For Installation Dimensions and Loads please refer to the Technical Data Sheets (TDS) or European Technical Assessment (ETA) under Downloads.
Curing times
Cartridge Temperature should be min. +15˚C. For damp bore holes the curing time should be doubled.
| Concrete temperature ˚C | Processing time | Dry Drill holes |
| ≥ -10 | 90 min | 24 hrs |
| ≥ -5 | 90 min | 14 hrs |
| ≥ 0 | 45 min | 7 hrs |
| ≥ +5 | 25 min | 2 hrs |
| ≥ +10 | 15 min | 80 min |
| ≥ +20 | 6 min | 45 min |
| ≥ +30 | 4 min | 25 min |
| ≥ +35 | 2 min | 20 min |
| ≥ +40 | 1.5 min | 15 min |
Alternatives and supplementary products
F-300 Premium
Holder for 300ml foil cartridges3200302
