BIS-V Vinylester, 420 ml

BIS-V Vinylester, 420 ml

€34.65

BIS-V is a ETA option 1 assessed, rapid cure, styrene free, non-sag, Vinylester bInjection Adhesive for HIGH LOADS. BIS-V is suitable for both Threaded Rod and Rebar in cracked and non-cracked concrete

Features

  • ETA Assessed for Threaded Rods M8 - M30 and Rebar Dowels Ø8 - 32 mm
  • ETA Approved for Post Installed Rebar Ø8 - 25 mm
  • Impact tested for the installation of Safety Barrier Glazing and Glass Railings acc. to DIN 18008-4, Cat. A. new
  • For Cracked & Uncracked Concrete
  • For Dry, Wet & Flooded Holes
  • Fire Rated F120
  • Seismic Approval C1
  • VOC Rating A+
  • Leed Tested
  • Drinking Water Certificate
  • Styrene Free
  • B+BTEC DesignFix® Support

* Mandatory

TECHNICAL DOCUMENTATION

Extensive Technical Documentation for BIS-V Vinylester can be found under downloads in an easily searchable knowledge base. 

Installation Procedures

Installation Dimensions

For Installation Dimensions and Loads please refer to the Technical Data Sheets (TDS) or European Technical Assessment (ETA) under Downloads.

Curing Times

*Cartridge Temperature should be min. +15˚C. For damp bore holes the curing time should be doubled.

Concrete temperature ˚C Processing Time
Dry bore holes
≥ -10* 90 min 24 h
≥  -5 90 min 14 h
≥ 0 45 min 7 h
≥ +5 25 min 2 h
≥ +10 15 min 80 min
≥ +20 6 min 45 min
≥ +30 4 min 25 min
 ≥ +35 2 min 20 min
≥ +40 1,5 min 15 min