BIS-HY GEN2 Hybrid, 420 ml
BIS-HY GEN2 Hybrid, 420 ml
BIS-HY GEN2 is the Next Generation of Hybrid Adhesives. ETA Option 1 Assessed, rapid cure, styrene free, non-sag, Injection Adhesive for EXTREME LOADS. BIS-HY GEN2 is suitable for both Threaded Rod and Rebar in cracked and non-cracked concrete.
Features
- ETA Assessed for Threaded Rods M8 - M30, Rebar
Dowels Ø8 - 32 mm and Threaded Inserts M6 - M20 - ETA Assessed for Post Installed
Rebar Dowels Ø8 - 32 mm - For Cracked & Non-Cracked Concrete
- For Dry, Wet and Flooded Holes
- 100 Year Design Life
- No Cleaning required for Hollow Drilled Holes
- Fire Rated F120
- Seismic Action C1: M8 - M30
- Extended Seismic C2 Range: M12 - M24
- Styrene Free
- VOC Rating A+
- Leed Tested
- Drinking Water Certificate
- B+BTec DesignFix® Support
Part Nr.: 3250423
EAN: 8714345210636
TECHNICAL DOCUMENTATION
Extensive Technical Documentation for BIS-HY Hybrid GEN2 can be found under downloads in an easily searchable knowledge base.
Installation Procedures
Hammer drilling:
Hollow drilling:
Installation Dimensions:
For Installation Dimensions and Loads please refer to the Technical Data Sheets (TDS) or European Technical Assessment (ETA) under Downloads.
Curing Times:
Cartridge temperature should be between +5˚C and +40˚C.
| Concrete temperature ˚C | Processing time |
Dry Bore Holes |
Wet Bore Holes |
| -5 to -1 | 50 min | 5 h | 10 h |
| 0 to +4 | 25 min | 3,5 h | 7 h |
| +5 to +9 | 15 min | 2 h | 4 h |
| +10 to +14 | 10 min | 1 h | 2 h |
| +15 to +19 | 6 min | 40 min | 80 min |
| +20 to +29 | 3 min | 30 min | 60 min |
| +30 to +40 | 2 min | 30 min | 60 min |
-
Mixer BIS-HY and BIS-PE€0.82 -
Typhoon Dust extraction drill bits SDS+From
Starting at €59.49
-
Typhoon Dust extraction drill bits SDS-MaxFrom
Starting at €251.93
-
C-420 Premium€131.40 -
C-420 Electric€1,340.34