YOU ARE AT THE INTERNATIONAL WEBSITE, SWITCH TO: | NETHERLANDS | USA |  
   
 
 
   
  Roughening Tools  
   
         
 

For the roughening of diamond drilled holes. SDS-Max. Qty./1

Instructions for Use:

  • Machine is leaning to one side with the tool in the hole without pressure.
  • From this point make 3 revolutions leaning to the outside, while spinning the motor.
  • The bottom side of the tool rattles along the bottom part of the hole. The top half will roughen the top part.
   
 
Description Anchor Hole Diameter Drilling Depth EAN Part Nr.
Roughening Tool M16 18 mm 125 mm 8714345170930 3.900.040
Roughening Tool M20 22 - 25 mm 170 mm 8714345170947 3.900.041
Roughening Tool M24 26 - 28 mm 210 mm 8714345170954 3.900.042
Roughening Tool M27-30 32 - 35 mm 280 mm 8714345170961 3.900.043
 
     
  Adapter SDS+/M6   Extension Rod M6  
     
 

Adapter SDS+ with Internal Threading M6
Length 110 mm • Qty./1

  For the use with Adapter and Brushes.
Length 185 mm Qty./1
 
 
Description EAN Part Nr.
Adapter SDS+ 8714345149158 3.820.001
 
Description EAN Part Nr.
Extension Rod M6 8714345149165 3.820.002
 
  Steel Brushes   Blow Pump  
     
 
Brush For Rods EAN Part Nr.
Ø11 M8 8714345156668 3.820.011
Ø13 M10 8714345156675 3.820.013
Ø16 M12 8714345149066 3.820.016
Ø18 M14 8714345149073 3.820.018
Ø20 M16 8714345149080 3.820.020
Ø24 M20 8714345149097 3.820.024
Ø26 M22 8714345156682 3.820.026
Ø30 M24 8714345149110 3.820.030
Ø34 M30 8714345149127 3.820.034
 
Description EAN Part Nr.
Blow Pump 8714345060118 3.805.000
 
         
  Setting Tool   Setting Tool  
     
  Self-Locking Setting Tool for the installation of Anchor Rods
without hexagonal connection • Qty./1

  For the installation of Anchor Rods without hexagonal connection • Qty./1  
 
For Rods EAN Part Nr.
M8 8714345060057 3.803.008
M10 8714345060071 3.803.010
M12 8714345060088 3.803.012
M16 8714345060095 3.803.016
M20 8714345060101 3.803.020
 
For Rods EAN Part Nr.
M8 8714345059952 3.802.008
M10 8714345059969 3.802.010
M12 8714345059976 3.802.012
M14 8714345059983 3.802.014
M16 8714345059990 3.802.016
M20 8714345060002 3.802.020
M24 8714345060019 3.802.024
M30 8714345060033 3.802.030
 
         
 

Logo B+BTec

   
Contact General Products
Munterij 8 Privacy & Cookie Statement Core Drilling
4762 AH Zevenbergen On-Site with B+BTec Structural Anchoring
  Website B+BTec Netherlands Concrete Cutting
The Netherlands Website B+BTec USA Hammer Drilling
    Tile & Stone
T +31 168 331 260    
F +31 168 331 280   Folow us on:
E info@bbtectools.com
   
© Copyright 2010-2020 B+BTec. All Rights Reserved. B+BTec, Karat & Diamond3 are Registered Trademarks.