YOU ARE AT THE INTERNATIONAL WEBSITE, SWITCH TO: | NETHERLANDS | USA |  
   
 
 
   
     
 






Karat® AutoSpeed™

New Automatic Downfeed Unit for Karat®300
Core Drilling Systems.

Features

  • For blind and conduit holes
  • Bit Capacity: Ø8 mm to Ø300 mm
  • Blind holes with depth input up to 2000 mm
  • Continuous optimal downfeed speed due to intelligent processor
  • Auto touch and start function
  • Auto shut down and retract after reaching set depth or going through
  • In case of lock up of bit: auto stop, partial retrack and auto restart.

Photo left: AutoSpeed™ mounted on Karat® 300 Core Drilling Unit

 

Motor*
• Power: [W] 60
• Voltage: [V] 230
• Frequency: [Hz] 50/60
Dimensions:  
(L x W x H): [mm] 115 x 220 x 480
Weight:  
Overall: [kg] 8,5
IP Class: 55
Safety Class (EN-IEC 61029): I
* Other voltages and frequencies available upon request.

Karat® AutoSpeed
Part Nr. 2.000.237
EAN: 8714345196923

 

 
       
 
 

What's in the Box

  • AutoSpeed Unit
  • Carrying Case
  • Allen key 5 mm
  • Hexagon socket bolt M6 x 90
  • AutoSpeed shaft with keyway
  • Allen key 8 mm
  • Hex bolt M10 x 40 for slide 300
  • Bushing 32 mm for slide 300
  • Locking pin with washer
  • Operating Manual
 
       
 
 
 

Logo B+BTec

   
Contact General Products
Munterij 8 Privacy & Cookie Statement Core Drilling
4762 AH Zevenbergen On-Site with B+BTec Structural Anchoring
  Website B+BTec Netherlands Concrete Cutting
The Netherlands Website B+BTec USA Hammer Drilling
    Tile & Stone
T +31 168 331 260    
F +31 168 331 280   Folow us on:
E info@bbtectools.com
   
© Copyright 2010-2020 B+BTec. All Rights Reserved. B+BTec, Karat & Diamond3 are Registered Trademarks.