YOU ARE AT THE INTERNATIONAL WEBSITE, SWITCH TO: | NETHERLANDS | USA |  
   
 
 
   
A Revolutionary New SDS-Max Hammer Drilling System for Wet Use

B+BTec introduces a game changing, patented, Carbide Hammer Drilling System that offers unparalleled Drilling Speed, Increased Bit Life & Substantial Cost Savings when compared to conventional hammer drilling methods. The AquaSpeed PRO SDS-Max Hammer Drilling System uses coolant water to achieve very high penetrating rates while maintaining a limited degree of carbide wear.


The AquaSpeed PRO System features Easy Change Carbide Tips that are fitted onto 200 or 400 mm Drilling Shafts and can be used with regular SDS-Max Rotary Hammers. For greater drilling depths the system includes 300 mm extension rods. The Exchangeable Carbide Tip Diameters range from Ø14 up to Ø35 mm, making the AquaSpeed PRO System highly suited for Anchoring & Rebar Doweling Applications.

Benefits

  • Silica Dust Free
    No Expensive HEPA vacuum required
  • 2 x Faster Drilling, 4 x Longer Bit Life
  • Clean Bore Holes
  • Ideal for Deep Anchor Holes
    and Rebar Doweling
  • Substantial Cost Savings
  • Operator Friendly
  • Fits Standard SDS-Max
    Rotary Hammers
     
"Job done in no time..."

We got the opportunity to try out the brand new B+BTec
AquaSpeed Wet Hammer Bits on a project where we had
to drill hundreds of starter bar holes.

The AquaSpeed wet hammer bits got the job done, ahead of schedule and at far lower costs when compared to our
regular hammer bits.

 
     


  "So much Easier..."

...you just drill the hole in one go.
No more pulling back the bit time
after time to retrieve drill dust.

The AquaSpeed bits make our
job so much easier.

       
   
     
       
 

SDS-Max Water Injection Head

Complete with hose and water valve.
Fits Standard SDS-Max Rotary Hammers.

Recommended Rotary Hammer:
Appr.   8J for Bit Diameters Ø14 - 24 mm
Appr. 12J for Bit Diameters Ø22 - 35 mm

[A] SDS-Max Water Injection Head
Part Nr. 2.100.086
EAN: 8714345176598




 
       
 


Couplers

[B] M18 for Injection Head/Shaft
Part Nr. 2.100.151
EAN: 8714345214009
[C] M10 for Hammer Tips Ø14 - 18 mm
Part Nr. 2.100.082
EAN: 8714345176550
[D] M14 for Hammer Tips Ø20 - 25 mm
Part Nr. 2.100.084
EAN: 8714345176574
[E] M18 for Hammer Tips Ø26 - 35 mm
Part Nr. 2.100.081
EAN: 8714345176543




 
       
       
  Drilling Shafts  
   
 
[F] Drilling Shafts Ø14 - 18 mm
Length 200 mm
Part Nr. 2.100.240
EAN: 8714345197272
Length 400 mm
Part Nr. 2.100.080
EAN: 8714345176536
[G] Drilling Shafts Ø20 - 25 mm
Length 200 mm
Part Nr. 2.100.241
EAN: 8714345197289
Length 400 mm
Part Nr. 2.100.083
EAN: 8714345176567
[H] Drilling Shafts Ø26 - 35 mm
Length 200 mm
Part Nr. 2.100.242
EAN: 8714345197296
Length 400 mm
Part Nr. 2.100.085
EAN: 8714345176581
 
       
       
  Extension Rods    
 

Extension Rod for greater drilling depths. Ideal for deep anchor holes
and rebar doweling applications.

Length 300 mm. Multiple Rods can be coupled for even greater depths.

   
   
 
[I] Extension Rod Ø14 - 18 mm
Part Nr. 2.100.140
EAN: 8714345214153
[J] Extension Rod Ø20 - 25 mm
Part Nr. 2.100.141
EAN: 8714345214160
[K] Extension Rod Ø26 - 35 mm
Part Nr. 2.100.142
EAN: 8714345214177
 
       
       
 

Carbide Hammer Tips

Easy Change Carbide Hammer Tips for the use with the
AquaSpeed PRO Wet Hammer Drilling System.

 

 

 
[L] Hammer Tips Ø14 mm
Part Nr. 2.100.114
EAN: 8714345176604
[L] Hammer Tips Ø16 mm
Part Nr. 2.100.116
EAN: 8714345176611
[L] Hammer Tips Ø18 mm
Part Nr. 2.100.118
EAN: 8714345176628
[L] Hammer Tips Ø20 mm
Part Nr. 2.100.120
EAN: 8714345217659
[L] Hammer Tips Ø22 mm
Part Nr. 2.100.122
EAN: 8714345176642
[L] Hammer Tips Ø24 mm
Part Nr. 2.100.124
EAN: 8714345176659
[L] Hammer Tips Ø25 mm
Part Nr. 2.100.125
EAN: 8714345176666
[L] Hammer Tips Ø26 mm
Part Nr. 2.100.126
EAN: 8714345196978
[L] Hammer Tips Ø28 mm
Part Nr. 2.100.128
EAN: 8714345176673
[L] Hammer Tips Ø30 mm
Part Nr. 2.100.130
EAN: 8714345196992
[L] Hammer Tips Ø32 mm
Part Nr. 2.100.132
EAN: 8714345176680
[L] Hammer Tips Ø35 mm
Part Nr. 2.100.135
EAN: 8714345176697
 
       
  On-Site with B+BTec    
       
     
       
 

Logo B+BTec

   
Contact General Products
Munterij 8 Privacy & Cookie Statement Core Drilling
4762 AH Zevenbergen On-Site with B+BTec Structural Anchoring
  Website B+BTec Netherlands Concrete Cutting
The Netherlands Website B+BTec USA Hammer Drilling
    Tile & Stone
T +31 168 331 260    
F +31 168 331 280   Folow us on:
E info@bbtectools.com
   
© Copyright 2010-2020 B+BTec. All Rights Reserved. B+BTec, Karat & Diamond3 are Registered Trademarks.