BIS-PE GEN3 Pure Epoxy 585 ml

€61.55

Pure-Epoxy Injection Adhesive with ETA Option 1 Assessment for EXTREME Loads

For the use with Hammer, Diamond and Hollow Drill Bits.
No Cleaning required for Hollow Drill Bits.
TRUE 100 YEAR DESIGN LIFE!
For Dry, Wet and Flooded Boreholes.
Suited for the Installation of Threaded Rods, Rebar and Anchor Sleeves in Cracked and Non-Cracked Concrete.
C1 and C2 Seismic Assessment.
ETA for post-installed rebar acc. to TR069 NEW!
Significantly Higher Loads, certainly at higher temperatures.
Slow Curing, Ideal for Rebar Doweling at greater embedment depths.
Low VOC: A+ Rating.
F120 Fire Test Report.
Leed Certificate.

Part Nr.: 3220589
EAN: 8714345210698

TECHNICAL DOCUMENTATION

Extensive Technical Documentation for BIS-PE Pure-Epoxy GEN3 can be found under downloads in an easily searchable knowledge base.

Hammer Drilling:

Hollow Drill Bit:

Diamond Drilling:

For Installation Dimensions and Loads please refer to the Technical Data Sheets (TDS) or European Technical Assessment (ETA) under Downloads.

Cartridge Temperature should be between +5˚C and +40˚C.