BIS-P Polyester, 420 ml

BIS-P Polyester, 420 ml

€25.20

An ETA Assessed rapid cure, styrene free, non-sag, Polyester Injection Adhesive for MEDIUM LOADS. Suitable for Threaded Rods in non-cracked concrete and solid or hollow masonry.

Features

  • ETA Assessed for Threaded Rods M8 - M24 in non-cracked concrete
  • ETA Assessed for Threaded Rods M8 - M16 in solid or hollow masonry
  • For Dry, Wet & Flooded Holes
  • VOC Rating A+
  • High Chemical Resistance
  • Good Performance at low temperatures
  • Styrene Free
  • B+BTEC DesignFix® Support

* Mandatory

TECHNICAL DOCUMENTATION

Extensive Technical Documentation for BIS-P Polyester can be found under downloads in an easily searchable knowledge base. 

Installation Procedures

Installation Dimensions

For Installation Dimensions and Loads please refer to the Technical Data Sheets (TDS) or European Technical Assessment (ETA) under Downloads.

Curing Times

Cartridge Temperature should be between +5˚C and +40˚C.

Concrete temperature ˚C Processing Time Dry Bore Holes
-5 to -1 90 min 360 min
0 to +4 45 min 180 min
+ 5 to +9 25 min 120 min
+10 to +14 20 min 100 min
+15 to +19 15 min 80 min
+20 to +29 6 min 45 min
+30 to + 34 4 min 25 min
+35 to +39 2 min 20 min