YOU ARE AT THE INTERNATIONAL WEBSITE, SWITCH TO: | NETHERLANDS | USA |  
   
 
 
       
 

BIS-HY GEN2 Next Generation Hybrid Injection Adhesive

 

Extreme Loads +
Fast Curing

BIS-HY GEN2 is the Next Generation of Hybrid Adhesives. ETA Option 1
Assessed, rapid cure, styrene free, non-sag, Injection Adhesive for
EXTREME LOADS
. BIS-HY GEN2 is suitable for both Threaded Rod
and Rebar in cracked and non-cracked concrete.

In addition to all of the benefits of the first generation Hybrid Adhesives,
the new BIS-HY GEN2 is now ETA Assessed for the installation in Flooded
Holes and has an extended Seismic C2 Range.

Also, when installed in Hollow Drilled Holes, BIS-HY GEN2 no longer requires cleaning of the anchor hole, resulting in time savings up to 70%.

Features

  • ETA Assessed for Threaded Rods M8 - M30, Rebar
    Dowels Ø8 - 32 mm and Threaded Inserts M6 - M20
  • ETA Assessed for Post Installed
    Rebar Dowels Ø8 - 32 mm
  • For Cracked & Non-Cracked Concrete
  • For Dry and Wet Holes
  • ETA Assessed for Flooded Holes
  • No Cleaning required for Hollow Drilled Holes
  • Fire Rated F120
  • Seismic Action C1: M8 - M30
  • Extended Seismic C2 Range: M12 - M24
  • Styrene Free
  • VOC Rating A+
  • Leed Tested
  • Drinking Water Certificate
  • B+BTec DesignFix® Support

Part Nr. Description EAN Qty/Box
3.250.423 BIS-HY GEN2: 420 ml 871434521063 6 12
3.250.826 BIS-HY GEN2: 825 ml 871434521065 0 8
3.200.007 BIS-HY Mixer 871434518764 8 100



 
       
  SPECIFICATION DATA & DOWNLOADS    
       
  Specification Data1)    
 
 
       
  Downloads    
 
 
  1) For Combined Tension & Shear Loads please refer to the Free B+BTec DesignFix® Anchor Calculation Software or consult the B+BTec Engineering Department.  
  APPLICATION EXAMPLES    
       
   
       
  THREADED INSERTS    
       
  5.8 Zinc Plated

Internally Threaded with ETA Assessment for
Cracked & Non-Cracked Concrete.

 
 
Part Nr. Description Da x La Di x Li (max) EAN Qty/Box
3.872.006 BIS-IG   M6 10 x   90 M  6 x 20 8714345211145 10
3.872.008 BIS-IG   M8 12 x 100 M  8 x 20 8714345211152 10
3.872.010 BIS-IG M10 16 x 100 M10 x 25 8714345211169 10
3.872.012 BIS-IG M12 20 x 125 M12 x 30 8714345211176 10
3.872.016 BIS-IG M16 24 x 170 M16 x 32 8714345211183 5
Dimensions in mm. Da = Rod Diameter. La= Rod Length. Di x Li = Diameter Internal Threading x Max. Threading Length

 
       
  Stainless Steel A4-70

Internally Threaded with ETA Assessment for
Cracked & Non-Cracked Concrete.

 
 
Part Nr. Description Da x La Di x Li (max) EAN Qty/Box
3.873.006 BIS-IG   M6 A4 10 x   90 M  6 x 20 8714345211190 10
3.873.008 BIS-IG   M8 A4 12 x 100 M  8 x 20 8714345211206 10
3.873.010 BIS-IG M10 A4 16 x 100 M10 x 25 8714345211213 10
3.873.012 BIS-IG M12 A4 20 x 125 M12 x 30 8714345211220 10
3.873.016 BIS-IG M16 A4 24 x 170 M16 x 32 8714345211237 5
Dimensions in mm. Da = Rod Diameter. La= Rod Length. Di x Li = Diameter Internal Threading x Max. Threading Length

 
       
  RELATED PRODUCTS    
 
Dispensers Accessories Test Equipment

Manual, Battery operated & Pneumatic
Dispensing Tools for B+BTec BIS Injection Adhesives.

For Bore Hole Roughening and Cleaning,
Mixers and Sleeves.

For load testing of installed Threaded Rods
and Rebar Dowels

 
 

Logo B+BTec

   
Contact General Products
Munterij 8 Privacy & Cookie Statement Core Drilling
4762 AH Zevenbergen On-Site with B+BTec Structural Anchoring
  Website B+BTec Netherlands Concrete Cutting
The Netherlands Website B+BTec USA Hammer Drilling
    Tile & Stone
T +31 168 331 260    
F +31 168 331 280   Folow us on:
E info@bbtectools.com
   
© Copyright 2010-2020 B+BTec. All Rights Reserved. B+BTec, Karat & Diamond3 are Registered Trademarks.